Xconfiguration Audio Input Microphone [1; Xconfiguration Audio Output Hdmi [1, 3] Level; Xconfiguration Audio Output Hdmi [1, 3] Mode; Xconfiguration Audio Output Line [1 - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction
xConfiguration Audio Input Microphone [1..8] Mode
Set the audio input microphone mode.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the microphone connector.
Off: Disable the microphone connector.
Example: xConfiguration Audio Input Microphone 1 Mode: On
xConfiguration Audio Input Microphone [1..8] Type
The microphone connectors are intended for electret type microphones. The microphone connector
can be set to line or microphone mode.
ADMIN
Requires user role:
Value space: <Microphone/Line>
Microphone: Select Microphone when you have 48 V Phantom voltage and the pre-amplification
is On.
Line: Select Line when you have a standard balanced line input. The phantom voltage and pre-
amplification is Off.
Example: xConfiguration Audio Input Microphone 1 Type: Line

xConfiguration Audio Output HDMI [1, 3] Level

Define the output level of the HDMI output connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview of
the menu values represented in dB.
Requires user role: ADMIN
Value space: <-24..0>
Range: Select a value from -24 to 0dB.
xConfiguration Audio Output HDMI 1 Level: 0
Example:

xConfiguration Audio Output HDMI [1, 3] Mode

Determine if the audio channel on the HDMI output connector shall be enabled.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable the audio channel on the HDMI output.
Off: Disable the audio channel on the HDMI output.
xConfiguration Audio Output HDMI 1 Mode: On
Example:
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration xConfiguration
xConfiguration Audio Output Line [1..6] Channel
xConfiguration Audio Output Line [1..6] Equalizer ID
xConfiguration Audio Output Line [1..6] Equalizer Mode
xConfiguration Audio Output Line [1..6] Level
32
xCommand
Define whether the Audio Line output is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Value space: <Left/Right/Mono>
Left: The Audio Line output signal is the left channel of a stereo signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
xConfiguration Audio Output Line 1 Channel: left
Example:
Select the audio output line equalizer ID.
Requires user role: ADMIN
Value space: <1..8>
Range: Select EqualizerID 1 to 8.
Example: xConfiguration Audio Output Line 1 Equalizer ID: 1
Set the audio output line equalizer mode.
ADMIN
Requires user role:
<On/Off>
Value space:
On: Enable the equalizer for the audio output line.
Off: No equalizer.
xConfiguration Audio Output Line 1 Equalizer Mode: Off
Example:
Define the output level of the Audio Output Line connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview of
the menu values represented in dB.
Requires user role: ADMIN
Value space: <-24..0>
Range: Select a value from -24 to 0 dB.
xConfiguration Audio Output Line 1 Level: -10
Example:
API Reference Guide
xStatus Appendices
www.cisco.com