Adding Iec 61850 Device Object; Adding Logical Device Objects - ABB SPA-ZC 400 Installation And Commissioning Manual

SPA-ZC 400
4.5.1.
4.5.2.
38
Ethernet Adapter
Installation and Commissioning Manual
Add the objects in the following order:
1. IEC 61850 Device object (SPA-ZC 40x)
2. Logical Device objects
3. Logical Node objects
4. Data objects

Adding IEC 61850 Device object

To start building the object tree, add an IEC 61850 Device object in the
Communication structure by selecting the project name, that is Protocol Test in this
case. Then right-click to select Protocol Test and select New > IEC 61850 >
SPA-ZC 40x, see Fig. 4.5.1.-1. Project can contain several IEC 61850 Device
objects, for example all substation feeder configurations and exported
communication must be done separately for every device.
Fig. 4.5.1.-1 Adding an IEC 61850 Device object

Adding Logical Device objects

1. Right-click to select an IEC 61850 Device object (SPA-ZC 40x) and select
New > Communication > Logical Device. This generates the mandatory
logical device LD0, logical node LLN0 and its data structure for SPA-ZC 400.
Logical device LD0 describes SPA-ZC 400 and includes the data objects for
diagnostics and description. All data sets and report control blocks (RCB) will
be collected to LLN0.
1MRS755347
A040023