Scl Conformance Statement - ABB SPA-ZC 400 Installation And Commissioning Manual

1MRS755347
7.4.
Table 7.4.-1 SCL conformance degrees
SCL conformance
SCL.1 SCL File for Implementation
Available (offline)
SCL.2 SCL File available from
implementation online
SCL.3 SCL implementation
reconfiguration supported
online
a. The CID file is used to configure the device. Notice that you have to preserve the Communication Engineering Tool's (CET) private
sections to configure a device again. CET knows product limitations and it is recommended to use CET only for the configuration.
Table 7.4.-2 Supported ACSI services for SCL.2 and SCL.3
SCL conformance
ACSI Services
GetFileAttributeValues
GetFile
SetFile
DeleteFile
GetDataValues
SetDataValues
SCL Control Block
SCL File Structure
Remote Creation of SCL File
a. Must be m if support for SCL.2 is declared.
b. Must be m if support for SCL.3 is declared.
c. Must be m if support for SCL.2 or SCL.3 is declared.
Ethernet Adapter
Installation and Commissioning Manual

SCL conformance statement

The table below defines the support of Substation Configuration Language.
Client-CR
Base F/S
O
O
Implementations claiming conformance to SCL.2 or SCL.3 may support the ACSI
services defined in the table below.
Client-CR
Base F/S
O
O
O
O
O
O
I
I
I
Value/Range
o
o
Value/Range
o
a
b
o
c
a
i
m
o
SPA-ZC 400
Server-CR
Base F/S SPA-ZC 400/
Comments
m m Supported, CID
file export
o o Supported, CID
file can be
retrieved online
with FTP from
the device
o o
Supported
Server-CR
Base F/S SPA-ZC 400/
Comments
Not Supported
o m Not Supported
o Not Supported
a
o Not Supported
b
o Not Supported
b
o Not Supported
c
o Not Supported
a
o Not Supported
b
i m Not Supported
i o Not Supported
a
99