Protocol Implementation Conformance Statement; Profile Conformance; Mms Conformance - ABB SPA-ZC 400 Installation And Commissioning Manual

1MRS755347
7.6.
7.6.1.
Table 7.6.1-1 A-profile support
A1 Client/Server A-Profile
A2 GOOSE/GSE Management A-
Profile
A3 GSSE A-Profile
A4 TimeSync A-Profile
a. Must be m if support for any service specified for Client/S are declared within the ACSI basic conformance.
b. Must be m if support for any service specified for GOOSE/GSE Management are declared within the ACSI basic conformance.
c. Must be m if support for any service specified for GSSE A-Profile are declared within the ACSI basic conformance.
d. Support for at least one other A-Profile must be declared (e.g. in A1-A3) in order to claim conformance to IEC 61850-8-1.
Table 7.6.1-2 A-profile support
T1 TCP/IP T-Profile
T2 OSI T-Profile
T3 GOOSE/GSE T-Profile
T4 GSSE T-Profile
T5 TimeSync T-Profile
a. Must be m if support for A1 is declared. Otherwise, must be i.
b. Must be o if support for A1 is declared. Otherwise, must be i.
c. Must be m if support for A2 is declared. Otherwise, must be i.
d. Must be m if support for A3 is declared. Otherwise, must be i.
7.6.1.1.
Ethernet Adapter
Installation and Commissioning Manual

Protocol implementation conformance statement

In the tables below basic protocol conformance statements (PICS) are defined.

Profile conformance

Client
F/S
a
b
c
d
Client
F/S
a
b
c
d
o

MMS conformance

All needed services supporting the ACSI services stated to be supported in
paragraph 2 are supported by the MMS stack used.
Server SPA-ZC 400/Comments
F/S
Supported
a
Not Supported
b
Not Supported
c
d Not Supported
Server SPA-ZC 400/Comments
F/S
Supported
a
b Not Supported
Not Supported
c
Not Supported
d
o Supported
SPA-ZC 400
101