ABB SPA-ZC 400 Installation And Commissioning Manual page 46

SPA-ZC 400
Fig. 4.8.1.-1 SPA Communication Parameters
46
Ethernet Adapter
Installation and Commissioning Manual
• Enabled
This is the default operation mode. When the operation is selected, you can
synchronize SPA-ZC 400 with SNTP as it is defined in the IEC 61850-8-1
standard and SPA-ZC 400 is also synchronizing IED over SPA.
• Disabled
In this mode, you can only synchronize SPA-ZC 400 with SNTP and IED has a
different source of time synchronization.
• Read from device if supported
When this operation mode is selected, the time for SPA-ZC 400 is read from IED
over SPA. SNTP is not in use.
.
1MRS755347
A040135