Creating Project; Configuring Spa-Zc 400 By Using Connectivity Packages - ABB SPA-ZC 400 Installation And Commissioning Manual

SPA-ZC 400
4.3.
4.4.
36
Ethernet Adapter
Installation and Commissioning Manual

Creating project

You need to start the SPA-ZC 400 Communication Engineering Tool (CET) to open
and name a project, see Fig. 4.3.-1 and Fig. 4.3.-2.
Fig. 4.3.-1 Creating a new CET project
Fig. 4.3.-2 Opening a CET project

Configuring SPA-ZC 400 by using Connectivity Packages

First, you need to install the Connectivity Packages from the SPA-ZC 400
configuration CD, see Section 3.3. Installing Connectivity Packages. The RE_54_
Connectivity Packages contain needed data and tools to facilitate the building of an
object tree. It is strongly recommended to use Connectivity Packages to add
engineering efficiency.
It is recommended to install the Connectivity Package after
installing the Communication Engineering Tool (CET), see Section
3.2.2. Installing CET. If this is not the case, re-install the
Connectivity Packages after installing the CET, see Section 3.3.
Installing Connectivity Packages.
1MRS755347
A040014
A040013