Table of Contents
Advertisement
16.21 Supress Digits
Masks the display of digits as you dial them on the phone. Dialed digits are replaced with an s character. The button is
used to switch the suppression on/off. When supress digits has been set, the button's red lamp is lit. Pressing the button
again cancels the supression.
· If
en-block
dialing is active you will see the digits as you dial them. When you make the call the digits will be
22
supressed.
· When the option supress digits is used the call is not recorded in the call log.
16.22 User BLF
This type of button can be used to monitor the status of another user. The lamps state will indicate the status of the user.
· Off = Available
Pressing the button will make a call to the user.
· Slow Flash = Ringing
Pressing the button will display options to pickup the call.
· Fast Flash = On a Call
Pressing the button will display a number of options.
· Call
Call the user.
· Message
Cause a single burst of ringing on the user's phone. They will also see the message Please Call and your
extension number.
· Voicemail
Call the user's voicemail mailbox to leave a message.
· Auto Callback
Set an automatic callback on the user. The callback will occur when the users ends their current call.
The following options are only available if configured for you by your system administrator.
· Drop Call
Disconnect the user's current call.
· Acquire
Seize the user's current call.
· Intrude
Join the user's current call, turning it into a conference call.
· Listen
Start silent monitoring of the user's call.
In addition to calling the user, the button can be used in processes such as transferring calls or starting a conference
rather than dialing the user's extension number.
9600 Series Phone User Guide
IP Office
Button Features: Send All Calls
Page 97
Issue 03e (28 March 2011)
Advertisement
Table of Contents
