Table of Contents
Advertisement
9. Headset/Handsfree Operation
9.1 Headset Operation
Your phone has a headset socket located under the phone. This is suitable for the connection of phone headsets that
connect via a HIS headset cable.
· Pressing the
HEADSET key can be used to answer a call through the headset. It can also be pressed to end a
headset call.
· The key is lit when there is a call connected through the headset.
· The key can also pressed to turn a call already answered using the handset or handsfree into a headset call.
· If there are no currently connected call to which you are talking, a call answered by pressing its appearance button
is connected either handsfree or through the headset according to the phone's
· If there is already a connected call to which you are talking through the headset, answering another call by
pressing the appearance button will answer that call using the headset.
You can adjust the following handsfree settings:
Headset Volume
·
Headset Automatic Gain Control On/Off
·
Default Audio Path
·
9.1.1 Headset Volume
While talking via the headset, you can adjust the volume of the incoming call.
1. With the call connected on the headset, press the
2. Use the + plus and – minus keys to adjust the volume.
3. The display will return to normal after a few seconds.
9.1.2 Default Handsfree Audio Path
By default, when you make a call or answer a call without lifting the handset, the audio is played through the phone's
speaker while you speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior so the audio is played through the headset by
default rather than the speaker.
1. Press the
MENU button. On touch screen phones, press the
2. Use the
up and down
3. Use the
up and down
4. Use the
up and down
5. Press Change to change the setting between Headset and Speaker.
6. When completed, press the Save soft key.
7. Press the Back / Exit soft keys to exit the menus.
9600 Series Phone User Guide
IP Office
113
46
arrow keys to highlight Options & Settings. Press Select.
arrow keys to highlight Call Settings. Press Select.
arrow keys to highlight Audio Path.
113
key.
HOME button and select Settings.
audio path setting
.
46
Issue 03e (28 March 2011)
Page 46
Advertisement
Table of Contents
