Group Membership; Group Membership On/Off (Status Menu); Group Membership On/Off (Features Menu) - Avaya IP Office 960 Seris User Manual

15.1 Group Membership

Only the system administrator can change the groups of which you are a member. However, you can be provided with
options to enable or disable your group membership. While your membership of a group is disabled, you will not receive
any group calls for that group.

15.1.1 Group Membership On/Off (Status Menu)

If the system administrator has allowed you, you can enable/disable your membership of a group through the Status
menu. When your membership of a group is disabled you do not receive group calls for that group.
1. Press the Status soft key if shown.
· To access the status menu during a call, press the
shown.
2. Use the up and down
Enabled or Disabled).
3. Press the Enable or Disable soft key to change the status of your membership of that group.
4. Press Exit.
!
The system administrator is able to configure if you can access the Membership, State and Fallback options of
·
a group. If you are not configured for any groups then the Group menu is not shown.

15.1.2 Group Membership On/Off (Features Menu)

You may be able to enable or disable your group membership for some of the groups to which you belong.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
4. Use the up and down
5. To change your membership of the highlighted group press Change.
· To change your membership of all groups press More and then press either All Ena or All Dis.
!
The system administrator is able to configure if you can access the Membership, State and Fallback options of
·
a group. If you are not configured for any groups then the Group menu is not shown.
9600 Series Phone User Guide
IP Office
arrow keys to highlight the hunt group name and your current membership status (
arrow keys to highlight Group. Press Select.
arrow keys to highlight Membership. Press Select.
arrow keys to scroll through the list of hunt groups you can configure.
PHONE key and then press the Status soft key if
PHONE key and then press the
Groups:
Page 87
Issue 03e (28 March 2011)