Call Button And Indicator Light - CyberData 011123x Operation Manual

2.2.4 Call Button and Indicator Light

2.2.4.1 Indicator Light Function
•
•
•
•
•
2.2.4.2 Dialing from the Keypad
•
Operations Guide
Upon initial power or reset, the indicator light will illuminate.
When the software has finished initialization, the indicator light will blink twice.
When a call is established (not just ringing), the indicator light will blink.
On the Device Configuration
sets the normal state for the indicator light. The indicator light will still blink during initialization
and calls.
The indicator light flashes briefly at the beginning of RTFM mode.
Figure 2-6. Call Button and Indicator Light
See the Enable Telephone Operation
Parameters".
Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)
Page, there is an option called
setting in Section 2.3.6, "Configure the Button
930370N
Button Lit When Idle. This option
Call button and indicator light
CyberData Corporation
14
Parts List