Configure The Intercom Parameters - CyberData 011123x Operation Manual

2.3 Configure the Intercom Parameters

To configure the Intercom online, use a standard web browser.
Configure each Intercom and verify its operation before you mount it. When you are ready to mount
an Intercom, refer to
Mounted)"
All Intercoms are initially configured with the following default IP settings:
When configuring more than one Intercom, attach the Intercoms to the network and configure one at
a time to avoid IP address conflicts.
Parameter
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
a. Default if there is not a DHCP server present.
Operations Guide
Appendix A, "Mounting the Indoor VoIP Indoor Intercom with Keypad (Flush-
for instructions.
Table 2-5. Factory Default Settings
a
a
a
930370N
Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)
Factory Default Setting
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
Parts List
CyberData Corporation
18