Upgrading The Firmware And Rebooting The Intercom; Upgrading The Firmware - CyberData 011123x Operation Manual

2.4 Upgrading the Firmware and Rebooting the Intercom

2.4.1 Upgrading the Firmware

Note
Note
To upload the firmware from your computer:
1. Retrieve the latest Intercom firmware file from the VoIP Indoor Intercom with Keypad (Flush-
2. Unzip the firmware version file. This file may contain the following:
•
•
3. Log in to the Intercom home page as instructed in
4. Click the Update Firmware button to open the Upgrade Firmware page. See
Operations Guide
To guard against failed firmware upgrades, units shipped from CyberData with firmware
version 5.1.2 and later feature a built-in "fail safe" mechanism. Note that field upgrading
earlier units with v5.x.x will not allow for this feature.
Any units that have shipped with firmware version 6.0.0 or later will not be able to run
firmware that is version 5.1.2 or earlier.
Caution
When upgrading to firmware version 6.x.x from version 5.x.x or earlier, your device
configuration settings will be lost because the way that the device stores the
configuration settings is different in version 6.x.x.
GENERAL ALERT
Mounted) Downloads page at:
http://www.cyberdata.net/products/voip/digitalanalog/intercomkeypadflush/downloads.html
Firmware file
Release notes
Home Page".
Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)
Section 2.3.2, "Log in to the Configuration
930370N
Parts List
Figure 2-28.
CyberData Corporation
62