Call Button And Indicator Light - CyberData 11030 Operation Manual

2.2.4 Call Button and Indicator Light

2.2.4.1 Initial Power
Upon initial power or reset, you will see the following:
•
•
•
•
2.2.4.2 Calling
You may initiate a call by pressing the Call button.
An active call is indicated by the light blinking at one second intervals.
The Interfom will automatically answer an incoming call.
You can press the Call button to terminate an active call whether the call was an incoming call
or a call that was initiated by you.
Operations Guide
The light is on.
The light will blink twice to indicate that the Interfom has acquired its network settings and
is operational.
The first blink indicates that the Interfom has acquired its network settings.
The second blink indicates that the Interfom is operational.
Figure 2-8. Call Button and Indicator Light
930260E
Installing the VoIP Indoor Intercom
Parts List
Call button and indicator light
CyberData Corporation
12