CyberData 011123x Operation Manual page 37

Web Page Item
Call Disconnection
Terminate call after delay (in seconds)
Misc Settings
RTP Port (even)
3. After changing the parameters, click Save Settings.
Operations Guide
Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)
Table 2-10. SIP Configuration Parameters (continued)
Description
Type the desired number of seconds that you want to
transpire before a call is terminated.
Note: A value of 0 will disable this function.
Specify the port number used for the RTP stream after
establishing a SIP call. This port number has to be an even
number and defaults to 10500.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930370N
Parts List
CyberData Corporation
30