Call Button And Indicator Light - CyberData 011113 series Operation Manual

2.2.4 Call Button and Indicator Light

2.2.4.1 Initial Power
Upon initial power or reset, the Call Button light will blink twice to indicate that the Intercom
software is running.
2.2.4.2 Calling
• You may initiate a call by pressing the Call button.
• An active call is indicated by the light blinking at one second intervals.
• The Intercom will automatically answer an incoming call.
• You can press the Call button to terminate an active call whether the call was an incoming call
or a call that was initiated by you.
2.2.4.3 Dialing from the Keypad
• See the
Operations Guide
Figure 2-9. Call Button and Indicator Light
Enable Telephone Operation
930323A
Installing the VoIP Indoor Intercom with Keypad
setting in Section 2.3.6, "Configure the Button
Parts List
Call button and indicator light
Parameters".
CyberData Corporation
12