Device Action
Delete the "Ringback tone" audio file
Delete the "Ring tone" audio file
Delete the "Intrusion Sensor Triggered" audio file
Delete the "Door Ajar" audio file
Delete the "Night Ring" audio file
Trigger the Door Sensor Test (Sensor Config page)
Trigger the Intrusion Sensor Test (Sensor Config page)
a.Type and enter all of each http POST command on one line.
b. Must be in point-to-point mode see
Operations Guide
Table 2-21. Command Interface Post Commands (continued)
Section 2.3.5.1, "Point-to-Point Configuration"
Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)
HTTP Post Command
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"delete_ringback=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"delete_ringtone=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"delete_intrusionsensortriggered=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"delete_doorajar=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"delete_nightring=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/sensorconfig.cgi" --post-data
"doortest=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/sensorconfig.cgi" --post-data
"intrusiontest=yes"
930370N
a
CyberData Corporation
68
Parts List
Need help?
Do you have a question about the 011123x and is the answer not in the manual?
Questions and answers