Configure The Autoprovisioning Parameters - CyberData 011123x Operation Manual

2.3.12 Configure the Autoprovisioning Parameters

1. Click the Autoprovisioning button to open the Autoprovisioning Configuration page. 
2. On the Autoprovisioning Configuration page, you may enter values for the parameters
Web Page Item
Autoprovisioning
Enable Autoprovisioning
Get Autoprovisioning from DHCP
Autoprovisioning Server (IP Address) See
Autoprovisioning Autoupdate 
(in minutes)
Operations Guide
See Figure 2-27.
Figure 2-27. Autoprovisioning Configuration Page
indicated in Table 2-19.
Table 2-19. Autoprovisioning Configuration Parameters
Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)
Description
See Section 2.3.12.1,
See Section 2.3.12.1,
Section 2.3.12.1, "Autoprovisioning"
Type the desired time (in minutes) that you want the
Autoprovisioning feature to update (6 character limit).
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
930370N
"Autoprovisioning".
"Autoprovisioning".
(15 character limit).
CyberData Corporation
57
Parts List