Destinations - Mercedes-Benz COMAND Operating Instructions Manual

Destination memory
78
To enter the home address for the first
X
time: select Assign to Address Book
Entry and press the 9 button to confirm.
Select Home or
X
button to confirm.
To change the home address: select
X
Change and press the 9 button to confirm.
Select Assign to Address Book Entry
X
and press the 9 button to confirm.
i
If you select
offered the option of changing the home
address by entering an address. You can
then save the home address without having
to start route guidance.
Select Home or
X
button to confirm.
In both cases, you will see the address book
either with the character bar or as a
selection list.
To select an address book entry:
X
proceed as described in the "Searching for
an address book entry" section
( page 109).
Y
To confirm your selection: press button
X
9.
If no home address has been stored,
COMAND saves the entry. You will see a
message and then the address menu with
the selected address.
automatically.
If a home address has already been stored,
you will see a prompt asking you whether
the My Address
overwritten.
Select Yes or
X
to confirm.
If you select Yes, COMAND overwrites the
destination. You will see a message and
then the address menu with the selected
address. Start
automatically.
If you select No, the list will reappear.
Work and press the 9
New Entry, you are also
Work and press the 9
Start is highlighted
entry should be
No and press the 9 button
is highlighted
Selecting the home address for route
guidance
Proceed as described in the "Entering a
X
destination from the destination memory"
section ( page 54).
Y
Saving a destination in the
destination memory
Notes
This function also stores the destination in
the address book.
After destination entry
The destination has been entered and is
X
shown in the address entry menu
( page 51).
Y
Select Save using the :=;
X
9 buttons and press the 9 button to
confirm.
You can now select storage options
( page 79).
Y
During route guidance
To show the menu: press the 9 button.
X
Select Destination
X
menu bar using the :=;
buttons and press the 9 button to confirm.
Select Save Destination
X
9 button to confirm.
You can now select storage options
( page 79).
Y
From the list of previous destinations
To show the menu: press the 9 button.
X
Select Destination
X
menu bar using the :=;
buttons and press the 9 button to confirm.
Select From Last Destinations
X
press the 9 button to confirm.
The list of previous destinations appears.
in the navigation
and press the
in the navigation
and