Comand Features; Display Settings; Setting - Mercedes-Benz COMAND Operating Instructions Manual

Time settings
36

COMAND features

These Operating Instructions describe all
standard and optional equipment available
for your COMAND system at the time of
purchase. Country-specific deviations are
possible. Please note that your COMAND
system may not be equipped with all the
features described.

Display settings

Setting the brightness
The brightness detected by the COMAND
light sensor affects the setting options for this
function.
Press the W button.
X
Select Settings
X
the :=; buttons and press the
9 button to confirm.
Select Display
X
confirm.
Select Brightness
X
button to confirm.
Current setting
:
Adjust the brightness using the 9:
X
buttons and press the 9, = or k
button to confirm.
Display design
Press the W button.
X
using
and press the 9 button to
and press the 9
Select Settings using
X
the :=; buttons and press the
9 button to confirm.
Select Display and press the 9 button to
X
confirm.
Select Day Mode, Night Mode
X
Automatic using the 9: buttons
and press the 9 button to confirm.
The ä icon indicates the current setting.
i
When the Automatic
COMAND evaluates the readings from the
automatic vehicle light sensor and
switches between the display designs
automatically.
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
i
If you set the time in 30-minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost (
If your vehicle is not equipped with a
navigation system, you can set the minutes
exactly.
i
The following functions require the time,
time zone and summer/standard time to
be set correctly in order to work properly:
route guidance on routes with time-
R
dependent traffic guidance
calculation of expected time of arrival
R
time information for received and
R
outgoing phone calls
or
setting is selected,
page 37).
Y