Mercedes-Benz COMAND Operating Instructions Manual page 78

Traffic reports
76
To show all traffic reports (including those
1
not affecting the route)
To have traffic reports read out, see read-
2
aloud function (
Affected roads, areas or regions (only
3
available when there are traffic reports for
the route)
To show all traffic reports: use the
X
9:=; buttons to select
Display All Messages
9 button to confirm.
You see a list of all roads, areas and regions
for which traffic reports are available, even
if the reports do not affect your route.
To display a report: select a road, an area
X
or a region from the list.
To close the list: press the ; or =
X
button once or repeatedly.
page 73)
Y
and press the
Example: traffic report
Depending on your selection:
1
On Route or All Messages
Report 1 of 1 for the road affected
2
Beginning of the affected route section
3
End of the affected route section
4
Text of report
5
Road, area or region affected by traffic
6
reports
Icon for report type, e.g. warning message
C
Country code
D
To scroll within the message or to the
X
next message: press the 9 or :
button.
To return to the message list: press
X
the ; or = button.
Read-aloud function
The read-aloud function is only available while
route guidance is active. It reads out traffic
reports affecting the current route. You can
adjust the text reader volume (
If the automatic read-aloud function for traffic
reports is activated, received traffic reports
are read out automatically.
If necessary, switch on navigation mode
X
and show the menu system (
Use the 9:=; buttons to
X
select TMC and press the 9 button to
confirm.
Select Read out all messages on
X
route and press the 9 button to confirm.
Messages
page 27).
Y
page 47).
Y