Autostore; Storing - Mercedes-Benz COMAND Operating Instructions Manual

Radio mode
118
Select Enter Frequency
X
9 button to confirm.
Irrespective of the option used, an input
menu will appear.
Enter a frequency using the number keys.
X
COMAND tunes in to the frequency
entered.
Waveband
AM
FM
WB (Weather Band)
i
You can only enter currently permitted
numbers.
i
If you enter a frequency in the FM or AM
wavebands which is outside the frequency
range, COMAND tunes in to the next lower
frequency.
Storing a station
Storing stations manually
There are ten presets available for each
waveband (FM, AM, and SatRadio).
Quick save
Press and hold a number key, e.g. l,
X
until you hear a tone.
The station is stored.
Directly in the station presets
Press the 9 button when the display/
X
selection window is active.
or
Select Presets
X
the :=; buttons and press the
9 button to confirm.
In both cases, the station presets appear.
The # dot indicates under which preset
the currently selected station is stored.
and press the
Frequency
530 - 1710 kHz
87.8 - 107.9 MHz
Weather report
channels
in the radio display using
Station presets
Select a preset using the 9:
X
buttons and press and hold the 9 button
until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception. The search starts at
the lowest frequency. If stations are found,
COMAND stores them starting at memory
slot 1. Storing is complete when the highest
frequency has been reached or when 10
stations have been found. Stations stored
manually in the preset memory will be lost. It
is possible that COMAND does not fill all
memory slots when storing.
Option 1
Press the 9 button when the display/
X
selection window is active.
Select

Autostore

in the preset menu using
X
the 9: buttons and press the 9
button to confirm.
Option 2
Select Presets in the radio display using
X
the :=; buttons and press the
9 button to confirm.
Select Autostore and press the 9 button
X
to confirm.
In both cases, COMAND searches for
stations that can be received. You will see
a message to this effect. The available