Map Operation And Settings; Destinations - Mercedes-Benz COMAND Operating Instructions Manual

Route guidance is active
To show the menu: press the 9 button.
X
Select Position in the navigation menu
X
bar using the :=; buttons and
press the 9 button to confirm.
Select Destination Position Map
X
press the 9 button to confirm.
You will see the map with a crosshair at the
destination.
To show the menu: press the 9 button.
X
Select Position in the navigation menu
X
bar using the :=; buttons and
press the 9 button to confirm.
Select Save Crosshair Position
X
press the 9 button to confirm.
COMAND stores the crosshair position as
a destination in the list of previous

destinations.

Deleting one of the previous
destinations
To switch on navigation mode: press the
X
Ø function button.
To show the menu: press the 9 button.
X
Select Position in the navigation menu
X
bar using the :=; buttons and
press the 9 button to confirm.
Select From Last Destinations
X
press the 9 button to confirm.
The list of previous destinations appears.
Select the desired destination and press
X
the 9 button to confirm.
The destination address appears.
Select Delete and press the 9 button to
X
confirm.
A prompt appears, asking whether the
entry should be deleted.

Map operation and settings

Select Yes
X
to confirm.
If you select Yes, the entry is deleted.
If you select No, the process will be
canceled.
and
Map operation and settings
Notes
Company logos displayed on the map are
trademarks of the respective companies and
used solely for the purpose of indicating the
location of these companies. The use of such
logos for the map does not indicate approval,
support or advertisement of the navigation
and
system by the respective companies.
Adjusting the map scale
To call up the scale bar: press the U
X
or T button.
The map scale appears at the upper edge
of the screen.
To zoom in the map: press the U
X
button as often as necessary.
To zoom out the map: press the T
X
button as often as necessary.
and
Map with scale
Map scale
:
Currently set map scale as indicated by
;
the needle on the scale bar
Current map scale expressed as a number
=
with unit
or No and press the 9 button
81
Z