Intermediate Stop; Entering; Destinations - Mercedes-Benz COMAND Operating Instructions Manual

Entering an intermediate stop
Introduction
When route guidance is active, you can enter
an intermediate stop. Intermediate stops can
be predefined destinations from the following
categories that COMAND offers for selection:
Mercedes-Benz Service
R
Hospital
R
Gas Station
R
Parking Lot
R
Restaurant
R
However, you can also enter destinations
other than the predefined ones. To do this
select the menu item Other.
You can use the intermediate stop function to
influence route guidance to the main
destination. When you have reached your
intermediate stop, COMAND automatically
recalculates the route to the main
destination.
Entering predefined destinations
To switch to navigation mode: press the
X
Ø function button.
To show the menu: press the 9 button.
X
Select Destination
X
menu bar using the :=;
buttons and press the 9 button to confirm.
Select Stopover and press the 9 button
X
to confirm.
Option 1: no intermediate stop has been
entered yet.
in the navigation
Destination entry
Intermediate stop categories
Select a category.
X
Option 2: an intermediate stop has
already been entered.
Select Change Stopover
X
9 button to confirm.
Select a category using the 9:
X
buttons and press the 9 button to confirm.
COMAND first searches in the selected
category for destinations along the route.
If there are no destinations available there,
COMAND searches for destinations within
a radius of 100 km of the vehicle position.
If COMAND finds destinations, a list
appears on the right-hand side of the
display.
Example of display with "gas station" category
selected
Intermediate stop highlighted on the map
:
Current distance to and name of the
;

intermediate stop

The list shows intermediate stop destinations
On The Route and In the
57
and press the
area.
Z