Telephone Operation; Ending An Active Call; Sending Dtmf Tones; Single Call - Mercedes-Benz COMAND Operating Instructions Manual

Select ° in the character bar and press the
X
9 button to confirm.
or
While the ° icon is highlighted, press the
X
6 button on COMAND.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
To select a call: press the 9 or :
X
button.
To make a call: press the 9 or 6
X
button.
Connecting a call to an entry in a call list
or in the COMAND phone book
Call up a call list and select an entry using
X
the 9: buttons.
or
Call up the COMAND phone book and
X
select an entry using the 9:
buttons.
To make a call: press the 9 or 6
X
button.
Functions available during a call
Overview
Telephone operation with a single call
Person you are calling
:
Icon for active telephone connection
;
To switch hands-free microphone on/off
=

Telephone operation

To send DTMF tones (not possible with all
?
mobile phones)
Device name of the mobile phone
A
connected
To end a call
B
Switching the hands-free microphone
on/off
This function is also available during an active
phone call.
Call up the telephone basic menu
X
( page 99)
Y
To switch off: select
X
the 9 button to confirm.
If the microphone is switched off, the
display shows the Q icon and the
microphone is off
a short period.
To switch on: select
X
the 9 button to confirm.
The Q symbol disappears. You will briefly
see the The microphone is on

Ending an active call

Select ¢ and press the 9 button to
X
confirm.
or
Press the ~ button on COMAND or on
X
the multifunction steering wheel.
Call waiting
i
The "call waiting" function must be
supported by the network provider and be
enabled.
If you are busy with a single call and receive
another call, the telephone number of the call
waiting will be entered in the list of incoming
calls. A warning tone sounds.

Sending DTMF tones

This function is not supported by all mobile
phones.
Mike off and press
The
message appears for
Mike on and press
message.
Z
101