Multifunction Display - Mercedes-Benz COMAND Operating Instructions Manual

directions may cause you to divert your
attention from driving and increase your risk
of an accident.
Repeating navigation announcements
i
Audible navigation announcements are
muted during a telephone call.
If you have missed an announcement, you can
call up the current announcement at any
time.
To show the menu: press the Ø
X
function button.
Select + in the navigation menu bar using
X
the :=; buttons and press the
9 button to confirm.
Switching navigation announcements
on/off
To switch off: press the 8 button
X
during an announcement.
You will briefly see the message:
guidance instructions have been
muted.
To switch on: press the Ø function
X
button.
Select + in the navigation menu bar using
X
the :=; buttons and press the
9 button to confirm.
i
COMAND automatically switches the
navigation announcements back on when:
it receives RDS-TMC traffic reports
R
during traffic-dependent route guidance
and recalculates the route (
you have a new route calculated.
R
you switch COMAND back on again or
R
start the engine.
Reducing volume during a navigation
announcement
The volume of an active audio or video source
can be automatically reduced during a
navigation announcement.
Select
X
9=; buttons and press the 9
button to confirm.
Select
X
button to confirm.
Depending on the previous status, the
function is switched on O or off ª.
Setting the volume manually
Adjust the volume using the q control
X
knob during a navigation announcement.
or
Select + in the map view with the menu
X
shown and adjust the volume using the
q control knob.
The
Navigation system displays in the

multifunction display

Calling up the navigation system menu
Press the V or U button repeatedly
X
until
The view in the multifunction display depends
on whether route guidance is active or not.
Route guidance is inactive: the direction of
travel and, if known, the name of the road you
are currently traveling along are shown in the
multifunction display.
page 51).
Y Route guidance is active: the display in the
multifunction display depends on whether a
change of direction is announced or not.
When a change of direction is announced, you
will see a symbol for the change of direction
and a distance graphic. The distance
indicator shortens towards the top of the
display as you approach the point of the
announced change of direction.
Route guidance
Navi in the main menu bar using the
Audio fadeout and press the 9
Navi appears in the display.
69
Z