Destination; Map Information - Mercedes-Benz COMAND Operating Instructions Manual

Map operation and settings
84
Select Standard
X
Symbols or No
If you select Personal
points of interest appears.
To switch the icon display on/off: select
X
the point of interest using the 9:
buttons and press the 9 button to confirm.
Depending on the previous setting, the
icons will be switched on O or off ª. You
can switch on the icon displays for more
than one point of interest.
i
The list shows all icons that are contained
on the digital map across all countries.
However, not all points of interest are
available in all countries. As a result, certain
point of interest icons may not be displayed
on the map, even if the icon display is
switched on.
To exit the menu: press the =
X
or ; button.
Map information in the display
Displaying map information
During route guidance, you can have map
information displayed at the bottom edge of
the display.
To show the menu: press the 9 button.
X
Select Navi in the main menu bar using the
X
9=; buttons and press the 9
button to confirm.
Select Information On Map
X
9 button to confirm.
The ä icon indicates the current setting.
Select Arrival Time /
X
Current Street,
None and press the 9 button to confirm.
To exit the menu: press the =
X
or ; button.
Symbols, Personal
Symbols.
Symbols, the list of
and press the
Distance,
Geo-coordinates
Arrival time/distance to the destination
Arrival time/distance display switched on
Icon for destination
:
Distance to the destination
;
Icon for estimated time of arrival
=
Estimated time of arrival
?
You can only see this display during route
guidance. When scrolling the map
( page 82), you will see data, e.g. road
Y
names, depending on the crosshair position
if the digital map supports this data.
i
During route calculation, or if the vehicle
is traveling on a non-digitized road, the
linear distance to the destination is shown.
In this case, the display will be grayed out.
Road display
Road display active
Road name or designation
:
or