System Language Settings; Reset Function - Mercedes-Benz COMAND Operating Instructions Manual

System language settings

This function allows you to determine the
language for the menu displays and the
navigation messages. The selected language
affects the characters available for entry.
Press the W button.
X
Select Settings using
X
the :=; buttons and press the
9 button to confirm.
Select Language and press the 9 button
X
to confirm.
The list of languages appears. The # dot
indicates the current setting.
Select a language using the 9:
X
buttons and press the 9 button to confirm.
COMAND loads the selected language and
sets it.
i
If you select the Synchronize
Languages setting, COMAND sets the
same language as is already set in the
multifunction display.

Reset function

You can reset COMAND to the factory
settings. Amongst other things, this will
delete all personal data (e.g. station presets,
address book entries, entries in the
destination memory and in the list of previous
destinations in the navigation system).
Resetting is recommended before selling or
transferring ownership of your vehicle, for
example.
Data on the internal hard drive, e.g. music
files in the MUSIC REGISTER, will not be
deleted. You can delete these music files
from the MUSIC REGISTER using the "Delete
all music files" ( page 140) function.
Y
Press the W function button.
X
Select Settings using
X
the :=; buttons and press the
9 button to confirm.
Select Reset and press the 9 button to
X
confirm.
A prompt appears asking whether you wish
to reset.
Select Yes or No and press the 9 button
X
to confirm.
If you select No, the process will be
canceled.
If you select Yes, a prompt will appear again
asking whether you really wish to reset.
Select Yes or No and press the 9 button
X
to confirm.
If you select Yes, a message will be shown.
COMAND is reset and restarted.
If you select No, the process will be
canceled.
Reset function
43