Call Lists; Displaying Details - Mercedes-Benz COMAND Operating Instructions Manual

Using call lists
106
Enter characters and save the entry.
X
Proceed as described under "Entering
characters" in the "Entering characters in
the address and phone books" section
( page 22).
Y
Using call lists
Introduction
For telephony via the Bluetooth
COMAND shows a list of calls received
(including missed calls) or a list of calls dialed.
i
The respective menu item can only be
selected if calls have already been received
or dialed on COMAND.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
These lists remain in COMAND, even after
another mobile phone has been connected.
Opening the call list and selecting an
entry
Press the % function button.
X
Select

Call Lists

X
menu using the :=; buttons
and press the 9 button to confirm.
A menu appears.
Select Calls Received
X
Dialed using the 9: buttons and
press the 9 button to confirm.
The corresponding list appears.
®
interface,
in the telephone basic
or Calls
Example display: list of calls received
List of incoming calls
:
Date/time and phone number of the
;
selected entry
To call up options
=
i
You can also call up the list of dialed calls
by pressing the 6 button when the
telephone basic menu is shown. Doing so
displays only names or phone numbers
without a date or time.
Select an entry using the 9:
X
buttons.
To dial a phone number: press the 6
X
button.
To close the list: press the k button.
X
Displaying details about a list entry
COMAND can also show a shortened list entry
in full.
Select a list entry using the 9:
X
buttons.
Select Options using the ; button and
X
press the 9 button to confirm.
Select Details and press 9 to confirm.
X
The detailed display appears.
To return to the list: press the =
X
or ; repeatedly until the list is
highlighted.