Entering A Point Of Interest; Zagat ® Rating Service - Mercedes-Benz COMAND Operating Instructions Manual

Depending on the point of interest
selected, COMAND uses different
reference points in determining the linear
distance to the destination:
vicinity of current position: the linear
R
distance is the distance of the point of
interest from the current vehicle
position.
vicinity of destination: the linear distance
R
is the distance of the point of interest
from the destination entered.
Long names of points of interest are
abbreviated. An information icon is shown
after the entry.
To call up the complete display: press
X
the ; button.
Selecting a point of interest
Select a point of interest using the
X
9: buttons and press the 9 button
to confirm.
The full address of the point of interest
selected appears.
Point of interest with address
:
To start route calculation
;
To store an address in the destination
=
memory
To display details
?
To make a call (when available)
A
To cancel selection
B
To show an address on the map
C

Entering a point of interest

To start route calculation: select
X
and press the 9 button to confirm.
To store an address in the destination
X
memory: select Save
button to confirm. You can now select
storage options (
Y
To show the detailed view: select
X
Details and press the 9 button to
confirm.
To connect a call: select
X
the 9 button to confirm (available if the
point of interest entry contains a phone
number).
To call up the map: select
X
the 9 button to confirm.
You can scroll the map and select a
X
destination ( page 56).
Y
®
ZAGAT rating service
Entries featuring the Z icon contain additional
ZAGAT information. ZAGAT rates restaurants,
for instance, in regard to the quality of the
food, furnishing, service, and provides an
average pricing level as well as a general
description.
After selecting an entry with a Z icon, you can
call up the ZAGAT rating in the subsequent
screen.
Start
and press the 9
page 79).
Call and press
Map and press
Z
63