Characters - Mercedes-Benz COMAND Operating Instructions Manual

Basic functions of COMAND
26
Switching the data field
If you want to enter a first name after you have
entered a surname, for example, proceed as
follows to switch between the data fields:
Option 1
Select 4 or 5 in the character bar and
X
press the 9 button to confirm.
The input menu displays the data field
selected.
Cursor in the next data field
:
To store an entry
;
4 and 5 icons to select a data field
=
Option 2
Press the 9 button repeatedly until the
X
character bar disappears.
Select a data field using the 9:
X
buttons and press the 9 button to confirm.
Further functions available in the
character bar
To switch the character bar between
X
upper/lower-case characters: select
* or E and press the 9 button to
confirm.
To switch the character set: select
X
p and press the 9 button to confirm.
The character set switches between
upper/lower-case letters and digits.
To change the language of the
X
character bar: select B and press the
9 button to confirm.
Select a language using the 9 or :
X
button and press the 9 button to confirm.
To reposition the cursor within the data
X
field: select 2 or 3 and press the 9
button to confirm.
Cursor (repositioned)
:
2 and 3 icon to reposition the cursor
;
Delete the character/entry (
X
Storing an entry
Select the ¬ icon using the =;
X
9: buttons and press the 9 button
to confirm.
The entry is stored in the address book.
Basic functions of COMAND
Switching COMAND on/off
Press the q control knob.
X
A warning message appears. COMAND
calls up the previously selected menu.
i
If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
page 24).
Y