Selecting A Film/Title - Mercedes-Benz COMAND Operating Instructions Manual

Video DVD mode
154
To skip forwards or backwards: press
X
the = or ; button.
or
Press the E or F button on the
X
control panel.
The navigation menu (
for approximately eight seconds.

Selecting a film/title

This function is only available if the DVD is
divided into several films/titles.
If the DVD contains several films, these can
be selected directly. A film can be selected
either when the DVD is being played back or
when it is stopped.
The film can also be selected from the menu
on the DVD itself.
Show the menu (
X
Select DVD-Video
X
the :=; buttons and press the
9 button to confirm.
Select DVD Functions
X
button to confirm.
The "DVD functions" menu appears:
DVD functions menu
Select Title selection
X
9: buttons and press the 9 button
to confirm.
Select a film/title from the menu and press
X
the 9 button to confirm.
page 152) appears
Y
page 152).
Y
in the menu using
and press the 9
using the
DVD menu
Calling up the DVD menu
The DVD menu is the menu stored on the DVD
itself. It is structured in various ways
according to the individual DVD and permits
certain actions and settings.
In the case of multi-language DVDs, for
example, you can change the DVD language
in the DVD menu.
Show the menu (
X
Y
Select DVD-Video
X
the :=;9 buttons and
press the 9 button to confirm.
Select DVD Functions
X
button to confirm.
Select Menu and press the 9 button to
X
confirm.
The DVD menu appears.
Selecting menu items in the DVD menu
Select a menu item using the
X
9:=; buttons and press
the 9 button to confirm.
The menu appears.
i
Menu items which cannot be selected are
shown in gray.
To reconfirm your selection: select
X
Select and press the 9 button to confirm.
COMAND executes the function or shows
a submenu.
page 152).
in the menu using
and press the 9