Gracenote Media Database - Mercedes-Benz COMAND Operating Instructions Manual

Audio CD/DVD and MP3 mode
134
Symbol for next folder up
:
Current track
;
Track symbol
=
To switch to the superordinate folder:
X
select icon : and press the 9 button to
confirm.
The display changes to the next folder up.
Disc name (only if stored on the disc)
:
Current folder
;
Folder icon
=
Select a folder using the 9: buttons
X
and press the 9 button to confirm.
You will see the tracks in the folder.
Select a track using the 9: buttons
X
and press the 9 button to confirm.
The track is played and the corresponding
folder is now the active folder.

Gracenote Media Database

Introduction
This function is only available in audio CD
mode and during operation with the installed
hard disk.
There is a version of the software from
®
Gracenote , Emeryville, California, USA on
the hard disk. You will recognize this by the
logo which can be seen in the bottom right-
hand corner of certain audio displays.
Many audio CDs contain CD text. COMAND
uses the information contained therein to
display the artist, album and track name.
If the audio CD does not contain any CD text
information, COMAND can use the Gracenote
Media Database to identify unknown audio
tracks when running in audio CD mode. The
prerequisites for this are that the relevant
information be stored in the Gracenote Media
Database and that the "Read CD database"
function is activated.
If this is the case, COMAND will display the
corresponding data such as artist, album and
track name in the relevant displays and lists.
If COMAND accesses the Gracenote Media
Database when reading an audio CD, you will
see the following message: