Mercedes-Benz COMAND Operating Instructions Manual page 55

To cancel an entry
F
List
G
Complete the entry and call up the list as a
X
selection list ( page 24).
Y
Option 2: ZIP code list as selection list
ZIP code list
Press the 9 or : button repeatedly
X
until the desired ZIP code has been
selected.
Irrespective of the option, press the 9
X
button to confirm your selection.
If COMAND is able to assign the ZIP code
unambiguously to a specific address, the
address entry menu appears again. The ZIP
code appears in place of the city's name.
If COMAND cannot assign the ZIP code
unambiguously to a specific address, the
address entry menu also appears again.
The ZIP code is automatically entered. You
can now enter the street for a more precise
location. Only streets in the area covered
by the entered ZIP code are available.
Start route calculation (
X
Entering a center
Select Center in the address entry menu
X
using the =;9: buttons and
press the 9 button to confirm.
You will see the center list either with the
character bar (option 1) or as a selection
list (option 2).
Option 1: center list with character bar
page 51).
Y
Destination entry
Enter a center. Instructions for entering
X
characters can be found in the "Entering
characters in navigation mode (entering a
city)" section ( page 22).
Y
List entry most closely resembling the
:
characters entered so far
List
;
Character bar
=
Complete the entry and call up the list as a
X
selection list ( page 24).
Y
Option 2: center list as selection list
Select a center using the 9:
X
buttons.
Irrespective of the option, press the 9
X
button to confirm your selection.
The address entry menu appears again. The
center selected has been entered.
Start route calculation (
X
page 51).
Y
Z
53