Video Dvd Mode; Sound Settings - Mercedes-Benz COMAND Operating Instructions Manual

Video DVD mode

150
COMAND features
These Operating Instructions describe all
standard and optional equipment available
for your COMAND system at the time of
purchase. Country-specific deviations are
possible. Please note that your COMAND
system may not be equipped with all the
features described.
General information
Automatic picture shutoff
The video picture is only shown when the gear
lever is in position "P".
If the gear lever is shifted to a position other
than "P", the In order not to distract
you from the traffic situation, the
picture is faded out while the
vehicle is in motion
If you reset the gear lever to "P", the picture
will be displayed again.
Basic settings
Picture settings
Adjusting the brightness, contrast or
color
The following describes the video DVD and
video AUX modes.
Press the 9 button in video DVD mode and
X
show the menu.
Select DVD-Video
X
the :=; buttons and press the
9 button to confirm.
A menu appears.
Select Brightness,
X
using the 9: buttons and press the
9 button to confirm.
Select a setting using the 9:
X
buttons and press the 9 button to confirm.
message appears.
or AUX using
Contrast or Color
Changing the picture format
The following describes the video DVD and
video AUX modes.
Press the 9 button in video DVD mode and
X
show the menu.
Select DVD-Video
X
the :=; buttons and press the
9 button to confirm.
A menu appears.
Select 16:9 Optimized,
X
Widescreen using the 9: buttons
and press the 9 button to confirm.
The ä icon indicates the format currently
selected.

Sound settings

The sound settings can be selected to suit a
variety of different video sources. You can call
up the respective sound menu from the menu
of the desired mode (
Video DVD mode
Safety notes
G
WARNING
COMAND is classified as a Class 1 laser
product. You must not open the casing. If you
open the casing, or if the casing is faulty or
damaged, there is a risk of exposure to
invisible laser radiation. This may damage
your eyes, or those of others.
COMAND does not contain any parts that can
be serviced by the user. For safety reasons,
all maintenance work must be carried out by
qualified aftersales technicians.
G
WARNING
Only when the vehicle is stationary should
you:
load a disc
R
eject a disc
R
or AUX using
4:3 or
page 27).
Y