Mercedes-Benz COMAND Operating Instructions Manual page 81

Select the destination using the
X
9: buttons and press the 9 button
to confirm.
The destination address is shown.
Select Save and press the 9 button to
X
confirm.
You can now select storage options
( page 79).
Y
Selecting storage options
To save the destination without a
X
name: select Save Without Name
press the 9 button to confirm.
COMAND stores the destination in the
destination memory and uses the address
as the destination name.
To save the destination with a name:
X
select Save With Name
button to confirm.
Select a category, e.g. Home, and press the
X
9 button to confirm.
The input menu appears with data fields
and the character bar.
Example display: saving a destination with a name
Selected data field with cursor
:
Character bar
;
Proceed as described under "Entering
X
characters" in the Entering characters in
X
Assigning a destination to an address
book entry
An address with complete address data that
is suitable for navigation can be assigned to
an already existing address book entry. You
and
can then later start route guidance to this
address straight from the address book
(
X
and press the 9
X
X
X
X
X
Destination memory
navigation mode (entering a city)" section
( page 23).
Y
Then select ¬ and press the 9 button
to confirm.
COMAND stores the destination under the
name entered.
page 112).
Y
Select Assign to Address Book Entry
and press the 9 button to confirm.
Select a category, e.g. Home, and press the
9 button to confirm.
You will see the address book either with
the character bar or as a selection list.
To select an address book entry:
proceed as described in the "Searching for
an address book entry" section
( page 109).
Y
COMAND stores the data if the address
book entry selected does not yet contain
navigable address data.
If the selected address book entry already
contains navigable address data, a prompt
will appear asking whether you wish to
overwrite the existing data.
Select Yes or No and press the 9 button
to confirm.
If you select Yes, COMAND stores the data.
Deleting a destination or the home
address from the destination memory
To switch on navigation mode: press the
Ø function button.
To show the menu: press the 9 button.
79
Z