Connecting Ptz Cameras - Appendix #5 - Digimerge DHU500R Series Instruction Manual

Connecting PTZ Cameras - Appendix #5

Connecting PTZ Cameras - Appendix #5
PTZ Cameras (not included with this system) can be connected to the PTZ Control Block on the
back panel of the System. The PTZ Controls are enabled through the Menu system on the DVR.
Additional PTZ Cameras are available at http://www.Digimerge.com
Installing a PTZ (RS-445 Type) PTZ Camera:
1. Connect the Transmit Cable to the D+ port on the PTZ Control Block on the DVR.
2. Connect the Receive Cable to the D- port on the PTZ Control Block on the DVR.
3. Connect the Camera to BNC Channel 1.
4. Configure PTZ Menu options. The PTZ Camera Settings will depend on the Type of Camera -
refer to the specific Camera Manual for your brand and model of PTZ Camera.
DVR
PTZ CAMERA
(Not Included)
71