Mouse Control; Mouse Tips; Touch Panel Tips And Tricks - Digimerge Touch DH200 Series Instruction Manual

MOUSE CONTROL

The mouse is the primary control device for the system. To
connect a USB mouse:
• Connect a USB / PS/2 mouse to the USB port on the rear panel—
NOT
connect the mouse to the USB port on the front panel. The USB
port on the front panel is strictly intended for data transfer.
1. Left-Button: While in a split-screen display mode,
double-click an individual channel to view it in full-screen;
double-click again to return to the split-screen display mode.
While navigating menus, click to select a menu option;
double-click to open the next menu.
2. Right-Button: Right-click anywhere on the screen to open the Virtual Remote; double-click anywhere
on the screen to return to the previous menu.
3. Scroll-Wheel: Move the scroll wheel up or down to increase/decrease the value of a selected menu
option.

Mouse Tips

When using the mouse, the
corner of every menu window. When you change system settings and
configurations, click

Touch Panel Tips and Tricks

If using the Touch panel, you will often use the following
buttons when controlling the system:
Menus
• CLR : : move cursor up;
viewing
: show/hide OSD; clear channel icons
Menus
• / : : move cursor down;
viewing
: open Log menu
• / : Menus : move cursor left;
playback speed; Live viewing
• / : Menus : move cursor right;
playback speed; Live viewing
• Press the MENU/ESC button to open the main menu AND close
windows/exit
NOTE: This manual refers to the CANCEL/ESC button on the remote control for closing/exiting menu windows. If
using the front panel, press MENU/ESC to close/exit menu windows.
• Press the button to increase values for selected menu options
• Press the button to decrease values for selected menu options
• Press the button to enter/confirm.
and buttons appear in the top-right
ENTER EXIT
to confirm your changes.
Playback
: pause playback;
Playback
: stop playback;
Playback : increase reverse
: start/stop recording
Playback : increase forward
: start/stop scheduled recording
DO
1
3
Live
Live
2
7