Application Error Codes; Table 2-1 Application Error Codes - Honeywell UMC800 Reference Manual

Protocol Description

2.11 Application Error Codes

List of Codes
These codes are returned when ANAK is received in the response for a request that is rejected.
Error Code
0
0x1
0x2
0x4
0x8
0xA
0x10
0x11
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x30
0x31
12

Table 2-1 Application Error Codes

No Errors
Bad Command
Bad Operation
Bad data for the Command
Not Used
Busy Doing Command – Try Again Later
Invalid Header Byte
Bad Message Length
Bad Database Download Sequence
Invalid Database Table Number
Bad Record Number
Table Number Changed in the Middle of Download
Database Revision Level Mismatch
Bad Packet Size
Incomplete Record
SPP Database Table too big
Setpoint Program Segment Overrun
SPP – Invalid Mode for Editing (Not Reset or Hold)
RS232 Communications Reference Manual
Definition
8/99