Honeywell UMC800 Reference Manual page 102

Function Parameter Index Reference
RESET2 32
use_propband 33
use_rpm 34
sp_rate_dn 35
sp_rate_up 36
FF_GAIN 37
RATIO 39
LBIAS 40
devbar_hi 41
devbar_low 42
92
REAL integration time, 0 or 0.02 to 50 (minutes) or repeats per minute, 0
or 50 to 0.02 (repeats) [Tune Set 2]
BOOL Use Gain (0) or Proportional Band (1)
BOOL Use minutes (0) or repeats per minute (1) for integral constant
REAL Set point low rate of change limit, 0 (off) to 99999 (eu/min)
REAL Set point high rate of change limit, 0 (off) to 99999 (eu/min)
REAL
Feed forward gain, 0.0 to 10.0
REAL Gain value for Ratio PID (-20 to 20) (default 1) [ used when
RA_BIAS > 0]
REAL Bias value for Ratio PID when RA_BIAS = LOC_BIAS](-99999 to
99999) (0)
REAL
High scale value for deviation bar graph (0 to 99999) (default 100)
REAL Low scale value for deviation bar graph [always = -devbar_hi]
RS232 Communications Reference Manual 8/99