Stfl Function Block; Table 5-79 Stfl Dynamic Values - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.59 STFL Function Block

Description
The STFL label stands for the Setpoint Scheduler State Flags. This block is part of the Setpoint Scheduler
category. It looks like this graphically on the Control Builder.
Dynamic Values:
Parameter
status
GHOLD
READY
HOLD
RUN
STOP
STFL
Static Configuration Values
None
112

Table 5-79 STFL Dynamic Values

Index Type Use
0 REAL C
1 BOOL O
2 BOOL O
3 BOOL O
4 BOOL O
5 BOOL O
6 REAL I
RS232 Communications Reference Manual
R/W Description
R block status
R ON if state = 1.0, else OFF
R ON if state = 2.0, else OFF
R ON if state = 4.0, else OFF
R ON if state = 8.0, else OFF
R ON if state = 16.0, else OFF
R Encoded state input (See Note 1)
8/99