Ai Function Block; Table 5-5 Ai Dynamic Parameters - Honeywell UMC800 Reference Manual

5.5 AI Function Block

Description
The AI label stands for Analog Input. This block is part of the Loops category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 REAL
FAIL 2 BOOL
Static Configuration Parameters:
Table 5-6
Parameter Index Type
filt_time 2 REAL
bias 3 REAL
failsafe 4 REAL
range_hi 6 REAL
range_lo 7 REAL
8/99
Table 5-5 AI Dynamic Parameters
Use R/W Description
C R Block Status (see section 5.2 for code list)
O R analog input value (eu)
O R Failed input indication
AI Static Configuration Parameters
Description
filter time constant (seconds) {0-120} [default 0]
bias (eu).{-99999 to 99999} [default 0]
failsafe value (eu) [default 0]
high range value [default 0]
low range value [default 100]
RS232 Communications Reference Manual
Function Parameter Index Reference
41