Tot Function Block; Table 5-87 Tot Dynamic Parameters; Table 5-88 Tot Static Configuration Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.67 TOT Function Block

Description
The TOT label stands for Totalizer. This block is part of the Calculations category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
TOT 1 REAL
PREI 2 BOOL
IN 3 REAL
RPRE 4 REAL
EN 5 BOOL
RST 6 BOOL
Static Configuration Parameters:

Table 5-88 TOT Static Configuration Parameters

Parameter Index Type
lpre 1 REAL
rem 2 BOOL
decr 3 BOOL
120

Table 5-87 TOT Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R total (eu)
O R preset indicator
I R analog input value (eu)
I R remote preset in eu (1 to 999999)
I R ON enables the totalizer
I R ON resets the totalizer
Description
local preset (1 to 999999)
ON selects remote preset
ON selects decreasing from preset
RS232 Communications Reference Manual 8/99