2And Function Block; Table 5-9 2And Dynamic Parameters - Honeywell UMC800 Reference Manual

5.7 2AND Function Block

Description
The 2AND label stands for the AND Boolean function (2 Inputs). This block is part of the Logic or Fast
Logic category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 BOOL
DIG_1(X1) 2 BOOL
DIG_2(X2) 3 BOOL
Static Configuration Parameters: None
8/99
OR
Table 5-9 2AND Dynamic Parameters
Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R input
I R input
RS232 Communications Reference Manual
Function Parameter Index Reference
Fast Logic
43