Lmon Function Block; Table 5-38 Lmon Dynamic Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.30 LMON Function Block

Description
The LMON label stands for Low Monitor. This block is part of the Alarm/Monitor category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Parameter
status
OUT
X
Y
Static Configuration Parameters: None
72

Table 5-38 LMON Dynamic Parameters

Index Type Use
0 REAL C
1 BOOL O
2 REAL I
3 REAL I
RS232 Communications Reference Manual
R/W Description
R block status (see section 5.2 for code list)
R Output
R Monitored input
R Trip point
8/99