Not Function Block; Table 5-49 Not Dynamic Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.40 NOT Function Block

Description
The NOT label stands for the NOT Boolean logic function or Logic Inverter. This block is part of the
Logic or Fast Logic category. It looks like this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 BOOL
X 2 BOOL
Static Configuration Parameters: None
82
OR

Table 5-49 NOT Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R input
RS232 Communications Reference Manual
Fast Logic
8/99