Ltch Function Block; Table 5-40 Ltch Dynamic Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.32 LTCH Function Block

Description
The LTCH label stands for Latch. This block is part of the Logic or Fast Logic category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 BOOL
L 2 BOOL
U 3 BOOL
Static Configuration Parameters: None
74
OR

Table 5-40 LTCH Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R output
I R latch command
I R unlatch command
RS232 Communications Reference Manual
Fast Logic
8/99