Lsel Function Block; Table 5-39 Lsel Dynamic Parameters - Honeywell UMC800 Reference Manual

5.31 LSEL Function Block

Description
The LSEL label stands for Low Selector. This block is part of the Signal Selectors category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Parameter Index Type
status 0 REAL
OUT 1 REAL
YHI(YLO) 2 BOOL
X 3 REAL
Y 4 REAL
Static Configuration Parameters: None
8/99

Table 5-39 LSEL Dynamic Parameters

Use R/W Description
C R block status (see section 5.2 for code list)
O R primary output
O R override indication
I R input
I R input
RS232 Communications Reference Manual
Function Parameter Index Reference
73