Mdfl Function Block; Table 5-42 Mdfl Dynamic Parameters - Honeywell UMC800 Reference Manual

Function Parameter Index Reference

5.34 MDFL Function Block

Description
The MDFL label stands for Mode Flag. This block is part of the Loops category. It looks like this
graphically on the Control Builder.
Dynamic Parameters:
Parameter Index
status 0
AUTO 1
MAN 2
IMAN 3
LO 4
LOCAL 5
REM 6
MODE 7
Static Configuration Parameters: None
76

Table 5-42 MDFL Dynamic Parameters

Type Use R/W
REAL C R
BOOL O R
BOOL O R
BOOL O R
BOOL O R
BOOL O R
BOOL O R
REAL I R
RS232 Communications Reference Manual
Description
block status (see section 5.2 for code list)
ON if MODE = 0.0 or 4.0, else OFF
ON if MODE = 1.0 or 5.0, else OFF
ON if MODE = 2.0 or 6.0, else OFF
ON if MODE = 3.0 0r 7.0, else OFF
ON if MODE > 3.0, else OFF
ON if MODE < 4.0, else OFF
Encoded mode input
8/99