Rh Function Block; Table 5-63 Rh Dynamic Parameters - Honeywell UMC800 Reference Manual

5.50 RH Function Block

Description
The RH label stands for Relative Humidity. This block is part of the Calculations category. It looks like
this graphically on the Control Builder.
Dynamic Parameters:
Parameter
status
RH
DRY
WET
PRES
Static Configuration Parameters: None
8/99

Table 5-63 RH Dynamic Parameters

Index Type Use
0 REAL C
1 REAL O
2 REAL I
3 REAL I
4 REAL I
RS232 Communications Reference Manual
Function Parameter Index Reference
R/W Description
R block status (see section 5.2 for code list)
R Relative Humidity
R Dry bulb temperature
R Wet bulb temperature
R Atmospheric Pressure
95