Sun Microsystems Ultra 20 M2 Service Manual page 53

4. Type the following command to determine if your diagnostic partition is
configured to be mounted:
# ls /diagpart
If this command does not list the log files created by the hardware diagnostics
■
software, then the OS is not configured to mount the diagnostic partition.
Continue to Step
If this command lists the log files created by the hardware diagnostics software,
■
then the OS is configured to mount the diagnostic partition. All users have read
access to this partition. Only the superuser has read/write access to this partition.
You do not need to continue this procedure.
5. Insert the Tools and Drivers CD into the DVD drive tray.
6. When the CD mounts, open a terminal window.
7. Type the following to change directories:
# cd /cdrom/cdrom0/drivers/sx86
8. Type the following command to install the diagnostic partition:
# ./install.sh
9. Press the Enter key.
The following lines appear if the diagnostic partition is mounted successfully:
Mounting Diagnostic Partition
Installing Successful
10. Type the following command to list the contents of the diagnostic partition.
# ls /diagpart
5.
Chapter 4 Running Diagnostics 4-15